Husqvarna Viking Sapphire 835, Руководство пользователя

Страница: 21 / 56

21
2
875 Quilt
22 24 23
10
11 12
15
13
14
16
17
18
19
21
20
25
Operating the machine
14. Stitch Selection Buttons
By pressing any of the 0 to 9 buttons you select the stitch
illustrated on that button immediately.
By pressing two digits in quick succession you will be able to select
a stitch from 10 and up from the selected stitch menu. If the stitch
number does not exist in the selected stitch menu you will hear a
beep and the
À rst entered digit will be selected as a stitch.
15. Navigator Arrow Buttons
Make your selections with the arrow buttons and con À rm your
selections or changes with the OK button.
Use the left/right arrow buttons to select stitches step by step in
numerical order within the selected stitch menu.
The arrow buttons are also used when programming to select
stitches within the program or to select letters to insert in the
program.
The up and down arrow buttons are also used to set the size of
a buttonhole and to set the number of stitches when sewing on
a button.
16. Stitch Menu
Press this button to select a stitch from any of the stitch menus
shown on the GraphicDisplay.
17. Font Menu
Press this button to open the Font Menu on the GraphicDisplay
to select a font.
18. Shift to upper-case, lower-case or
numbers
Press this button to shift to lower or upper-case or numbers when
programming letters.
19. Save to My Stitches
This button opens the menu where you can save your own
personal stitches or stitch programs. Press the button again to exit
the My Stitches mode.
20. Program Mode
Press this button to open the mode for programming. Press the
button again to exit the program mode.
21. SET Menu
Press this button to open the menu for machine settings. Make
changes and selections by using the arrow buttons (15). Press the
button again to exit the SET Menu.
*Only on 875 Quilt
22. Stitch Re-start
(Only on 875 Quilt)
If you have stopped sewing in the middle of a stitch, touch Re-
start to start sewing at the beginning of the stitch again without
having to re-set any special settings you have made.
23. Mirror End to End
(Only on 875 Quilt)
Press this button to mirror the selected stitch end to end. If
the button is pressed in Sew Out Mode for stitch programs, the
whole stitch program is mirrored. The change is visible on the
GraphicDisplay.
24. Mirror Side to Side
Press this button to mirror the selected stitch side to side. If the
button is pressed when straight stitch with left needle position
is selected, the needle position is changed from left to right. If
the button is pressed in Sew Out Mode for stitch programs, the
whole stitch program is mirrored. The change is visible on the
GraphicDisplay.
25. Exclusive SEWING ADVISOR™
The Exclusive SEWING ADVISOR™ feature sets the
best stitch, stitch length, stitch width, sewing speed, thread
tension* and Sensor Foot Pressure for the selected fabric and
sewing technique. The stitch is shown on the GraphicDisplay
with presser foot, thread tension (835/855) and needle
recommendations. Press the buttons for the fabric you are using
and the sewing technique you wish to sew.