background image

26

Sewing

Gathering Foot

Gather fabric or gather and attach a ruf

fl

 e in one 

step. Suitable for light to medium weight fabrics. 
Straight stitch, (left needle position), length 3 to 6. 
The longer the length, the more fabric will gather. 
Snap on Gathering Foot.

For gathered fabric:

Place fabric under Gathering Foot and sew. 
Increase upper tension for tighter gathers. 

To gather and attach gathered fabric in one 
step:

1. Place fabric to be gathered under the presser 

foot right side up.

2. Place fabric to have ruf

fl

 e attached to it in the 

groove of  the foot right side down.

3. Sew, guiding the under fabric but do not hold 

it back. Keep the top fabric in the groove 
moving steadily as needed. Increase the stitch 
length and the upper tension for more gathers.

Quilter’s 1/4” Piecing Foot

Sew a scant 1/4” seam allowance. Red lines 
mark 1/4” and 1/8” pivot points in front of  and 
behind the needle. Straight stitch, length 2.0-2.5.
1. Place to pieces of  fabric right sides together.
2. Sew with edge of  fabric at edge of  foot. To 

pivot 1/4” from end of  fabric, stop sewing 
with needle stop down, when fabric edge 
reaches 

fi

 rst red mark on foot.

Содержание Prelude 350





































Отзывы: