Husqvarna Viking Prelude 350 Скачать руководство пользователя

Страница: 6 / 36

Procedures

Connecting the Foot Control

Among the accessories you will

nd the foot con-

trol cord and the main cord.

Remove the foot control cord. Place the foot

control on its narrow side. Fit the plug into the
socket inside the foot control compartment.

Push it

rmly to make sure it is properly

connected. This operation is only necessary
the very

rst time you are going to use the

machine.

To correctly turn away the cord, place it into
the slot.

Note:

Before plugging in, check to ensure that

the foot control is of type ”FR4”.

Connecting to the Power
Supply

On the underside of the machine you will

information about the power supply (V) and the
frequency (Hz). Check the power supply setting
in the machine to ensure that this agrees with the
main supply before you connect the machine.

Connect the foot control cord to the

rst

socket on the bottom right side of the
machine.

Connect the main cord to the back socket on
the bottom right side of the machine.

When you press the power switch, both the

machine and the light are switched on.

For the USA and Canada

This Sewing Machine has a polarized plug (one
blade wider than the other). To reduce the risk
of electric shock, this plug is intended to

t in a

polarized outlet only one way. If the plug does
not

t fully in the outlet, reverse the plug. If it

still does not

t, contact a quali

ed electrician to

install the proper outlet. Do not modify the plug
in any way.

Содержание Prelude 350




































Результаты поиска

Содержание Prelude 350

Отзывы:

Похожие инструкции для Prelude 350

Бренды по названию

Популярные бренды

Husqvarna Viking Prelude 350, Руководство пользователя

Результаты поиска

Содержание Prelude 350

Отзывы:

Похожие инструкции для Prelude 350

Бренды по названию

Популярные бренды