Husqvarna Viking Platinum 775, Руководство пользователя

Страница: 10 / 64

8
1.
3.
4.
5.
2.
a
a
Learn your Platinum
Needle Threader
The needle must be in the up position to
use the needle threader. We also
recommend lowering the presser foot.
Switch off the main switch.
1. Pull the needle threader all the way
down, catching the thread under the
guide (a).
2. Bring it forward until the metal Á anges
cover the needle. A small hook will pass
through the needle eye.
3. Place the thread around the guide (a)
and under the Á anges in front of the
needle, so the thread catches into the
small hook.
4. Let the needle threader gently swing
back. The hook pulls the thread
through the needle eye and forms a
loop behind the needle. Pull the thread
loop out behind the needle.
5. Place the thread under the presser foot
and cut the thread.
NOTE
:
The needle threader is designed to be used
for size 70-120 needles. You cannot use the needle
threader for size 60 needles or smaller, the wing
needle, twin needle, triple needle or when the But-
tonhole Sensor Foot is on. There are also some
optional accessories that require manual threading
of the needle (see below).
When threading the needle manually make sure
that the needle is threaded from front to back.
The white presser foot ankle makes it easy to see
the eye of the needle. The bobbin case cover can
be used as a magnifying glass.