Husqvarna Viking Huskylock S25, Руководство пользователя

Страница: 40 / 52

38
CHAINSTITCH SEWING
The Chainstitch is sewn with two threads, one needle and one
looper. Normally, the machine trims the fabric edge while
the seam is being sewn. However, a Chainstitch seam can be
placed at a desired distance from edge of fabric by putting
the upper cutter in position C, disengaging the upper looper
and installing Coverstitch table C.
7XUQRII WKHPDLQSRZHUVZLWFKDQGXQSOXJWKHPDFKLQH
Machine Set Up
1.
'LVHQJDJHWKHPRYDEOHXSSHUFXWWHU&SRVLWLRQVHH
SDJH7KHIDEULFVKRXOGQRWEHWULPPHGRQWKLV
stitch.
2. Disengage the upper looper
SDJH
5HPRYHFXWWHUFRYHU6DQGLQVWDOO&RYHUVWLWFKWDEOH&SDJH
. The graduations on the Coverstitch table indicate
the distance, in cm and inches, from Coverstitch middle
needle. Use it as a guide when positioning the fabric edge.
Start and End of Sewing
When starting to sew, pull the thread chain lightly to the rear
of machine until the needle penetrates the fabric.
When starting to sew after threading the machine, sew 2-3 cm
ȩRQDVFUDSIDEULFDQGFKDLQRII VHHSDJHWRPDNH
a chain.
At end of sewing, pull the fabric lightly to the rear of
machine and chain-off.
SEWING HINTS
Pintuck Sewing
6HZGHFRUDWLYHSLQWXFNVRQWKHIDEULFEHIRUHFXWWLQJRXW
the garment.
2. Use overlock right needle and select narrow 3-thread
RYHUORFNVWLWFKVWLWFKQXPEHU
Note: The rolled edge stitch can also be used for this technique.
'LVHQJDJHWKHPRYDEOHXSSHUFXWWHU&SRVLWLRQVHHSDJH
7KHIDEULFVKRXOGQRWEHWULPPHGRQWKLVVWLWFK
4. Mark the fabric with the desired number of pintucks
using a water-soluble fabric marker.
5. Fold the fabric with the wrong sides together and sew.
3UHVVWKHSLQWXFNVLQWKHVDPHGLUHFWLRQ
Lowering the needle(s)
When you stop sewing, the machine always stops with the
QHHGOHVLQWKHXSSRVLWLRQ7DSWKHIRRWFRQWURORQHWLPH
WRORZHUWKHQHHGOHVLQWRWKHIDEULF7KHQHHGOHGRZQ
position is useful to hold your fabric in place when making
adjustments or when turning the fabric to change direction
when chainstitch sewing.
Sew in Circles
(only suitable for heavy and medium weight fabrics)
The extension table has 13 holes in it used to sew in circles.
6HZFLUFOHVZLWKWKHPRYDEOHXSSHUFXWWHUHQJDJHG&
SRVLWLRQVHHSDJHWRJHWDEHDXWLIXOHGJHRUGLVHQJDJH
WKHPRYDEOHXSSHUFXWWHU6SRVLWLRQDQGVHZFLUFOH
embellishments.
1. Mark a dot in the center of the area that will be the circle
and place stabilizer under the fabric.
3LHUFHWKHIDEULFDWWKHPDUNZLWKWKHVKDUSHQGRI WKH
SXVKSLQ$3ODFHWKHSLQLQWRWKHVHOHFWHG
KROHRQWKHH[WHQVLRQWDEOH3XVKWKHSLQ
DQGLWVERWWRPSODWH%WRJHWKHU
3. Lower the presser foot and sew. The fabric
will feed in a circle around the push pin.
4. When the circle is complete, overlap the
VHDPIRUDIHZFHQWLPHWUHVDQLQFK
Thread the threads into a large eyed, hand sewing needle
and pull them to the wrong side of the fabric and secure.
Securing the Thread Chain
1. Thread the chain into a large eyed, hand sewing needle.
2. Insert the needle into the end of the seam and pull the
chain into the seam to secure the threads.
Sewing with heavy decorative threads in the loopers
Heavy decorative threads need less thread tension than
regular threads to give the best sewing result. When threading
a heavy decorative thread, place the thread through the hole
in the top cover looper thread guide and let it pass above
the guide as illustrated below. Then continue threading as
described in the threading section.
A
B
Braiding by Chaining Off
1.
'LVHQJDJHWKHPRYDEOHXSSHUFXWWHU&SRVLWLRQVHH
SDJH
,QVHUWÀOOHUFRUGVXFKDV\DUQRUWZLOOWDSHWKURXJKWKH
hole in the front of the foot.
3RVLWLRQWKHÀOOHUFRUGXQGHUWKHIRRWDQGFKDLQRII WKH
desired length.
4. Chained off braids can be used individually or woven
into 3 or 4 ply braids.
Note: When using decorative threads,
SODFHWKHWKUHDGXQUHHOLQJGLVFDV
VKRZQWRSUHYHQWWKHWKUHDGIURP
getting caught on the edge of the
VSRRO