Husqvarna Viking Huskylock S25, Руководство пользователя

Страница: 22 / 52

20
THREAD CHAINSTITCH/
COVERSTITCH LOOPER (PURPLE)
• Raise the presser foot to release tension discs.
•
3DVVWKHWKUHDGIURPEDFNWRIURQWWKURXJKWKHWKUHDG
JXLGHRQWKHWKUHDGVWDQG
• Thread the top cover thread guide by pulling the thread
towards the right until it slips under the guide. Then
pull the thread along the right side of the button as
LOOXVWUDWHG
• While holding the thread with both hands, pass it
between the tension discs and pull it down to make
FHUWDLQLWLVSURSHUO\SODFHGEHWZHHQWKHWHQVLRQGLVFV
• Turn the hand wheel toward you until the Chainstitch
looper is at the far right.
• Thread the looper area of the machine following the
SXUSOHFRORUFRGHGWKUHDGJXLGHV
•
3ODFHWKHWKUHDGWKURXJKWKUHDGLQJJXLGH
•
3ODFHWKHWKUHDGWKURXJKWKHIURQWVORWRI WKUHDGLQJ
JXLGH
• Continue threading through guides 6-7.
‡ 7KUHDGWKH&KDLQVWLWFKWKUHDGJXLGHE\KROGLQJWKH
thread in front of the thread guide pin and pulling the
thread backward and up, until the thread rests inside the
thread guide loop and under the spring.
•
7RWKUHDGWKHODVWWKUHDGJXLGHSXOODERXWFPRI
thread through guide 9.
7KUHDGWKHORRSHUH\H$IURPIURQWWREDFNXVLQJWKH
WZHH]HUV0DNHVXUHWKHWKUHDGUXQVLQWRWKHOHIW´9µ
FXWRXW%RQWKUHDGHUOHYHU)LUPO\KROGWKHWKUHDGWDLO
ZLWK\RXUOHIWKDQGDQGSXOOWKHWKUHDGHUOHYHU&XSLQWR
place and back to snap the thread into thread guide 10.
A
C
B
1
2
3
4
5
6
7
9
11
8
10
10
2