background image

75

Embroidery

Start embroidering

1.

 Touch 

  to begin embroidering. The 

presser foot is lowered automatically.

2.

 After a few stitches a Pop-up menu will 

prompt you to cut the starting thread tail. Cut 
the thread tail. Touch 

  to resume embroi-

dering.

3. 

Your 

Designer I

USB

 will stop embroidering 

and a Pop-up menu will prompt you when 
the top thread color should be changed.

4.

 When your embroidery is complete, your 

Designer I

USB

 will stop sewing, the top and 

bob bin thread are cut automatically, and the 
presser foot is raised to the extra lift position 
to make it easy to slide off the hoop.

To move the hoop forward for 
easy cutting

When changing from one thread to another, it is 
best to cut the long ”jump” stitches that are 
created when the hoop is moving. This will 
make the thread cutting easier when the 
embroidery is fi nished.

1.

 Press 

 . The hoop moves towards you.

2.

 Cut the threads.

3.

 Press 

  again and the hoop moves back to 

its ready po si tion.

4.

 Press 

  to resume the embroidery.

Содержание Designer I






















































































































Отзывы: