2
3
GENERAL SAFETY RULES
WARNING:
Read and understand all instructions.
Failure to fol-
low all instructions listed below may result in electric
shock, fire, and/or serious personal injury.
SAVE THESE INSTRUCTIONS
WORK AREA
n
Keep your work area clean and well lit.
Cluttered
benches and dark areas invite accidents. Floor must
not be slippery from wax or dust.
n
Do not operate power tools in explosive atmo-
spheres, such as in the presence of flammable liq-
uids, gases, or dust.
Power tools create sparks which
may ignite the dust or fumes.
n
Keep bystanders, children, and visitors away while
operating tools.
Distractions can cause you to lose
control.
n
Operate air compressor in an open area at least
18 in. away from any wall or object that could re-
strict the flow of fresh air to ventilation openings.
ELECTRICAL SAFETY
n
Avoid body contact with grounded surfaces such as
pipes, radiators, ranges, and refrigerators.
There is an
increased risk of electric shock if your body is grounded.
n
Don’t expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
n
Do not abuse the cord. Never use the cord to carry
the tool or pull the plug from an outlet. Keep cord
away from heat, oil, sharp edges, or moving parts.
Replace damaged cords immediately.
Damaged
cords increase the risk of electric shock.
n
When operating a power tool outside, use an outdoor
extension cord marked “W-A” or “W”.
These cords
are rated for outdoor use and reduce the risk of electric
shock.
PERSONAL SAFETY
n
Eye protection which conforms to ANSI specifica-
tions and provides protection against flying particles
both from the FRONT and SIDE should ALWAYS be
worn by the operator and others in the work area
when loading, operating, or servicing this tool.
Eye
protection is required to guard against flying fasteners
and debris, which could cause severe eye injury
.
n
The employer and/or user must ensure that proper
eye protection is worn.
We recommend a Wide Vision
Safety Mask for use over eyeglasses or standard safety
glasses that provide protection against flying particles
both from the front and side. Always use eye protection
which is marked to comply with ANSI Z87.1.
n
Additional safety protection will be required in some
environments.
For example, the working area may
include exposure to a noise level which can lead to
hearing damage. The employer and user must ensure
that any necessary hearing protection is provided and
used by the operator and others in the work area.
Some environments will require the use of head protec-
tion equipment. When required, the employer and user
must ensure that head protection marked to comply
with ANSI Z89.1 is used.
n
Stay alert, watch what you are doing, and use com-
mon sense when operating a power tool. Do not
use tool while tired or under the influence of drugs,
alcohol, or medication.
A moment of inattention while
operating power tools may result in serious personal
injury.
n
Dress properly. Do not wear loose clothing or
jewelry. Contain long hair. Keep your hair, clothing,
and gloves away from moving parts.
Loose clothes,
jewelry, or long hair can be caught in moving parts.
n
Do not overreach. Keep proper footing and balance
at all times.
Proper footing and balance enables better
control of the tool in unexpected situations.
n
Use safety equipment. Always wear eye protection.
Dust mask, nonskid safety shoes, hard hat, or hearing
protection must be used for appropriate conditions.
n
Do not use on a ladder or unstable support.
Stable
footing on a solid surface enables better control of the
tool in unexpected situations.
TOOL USE AND CARE
n
Do not exceed the pressure rating of any compo-
nent in the system.
n
Protect material lines and air lines from damage or
puncture.
Keep hose and power cord away from sharp
objects, chemical spills, oil, solvents, and wet floors.
n
Check hoses for weak or worn condition before
each use, making certain all connections are se-
cure.
Do not use if defect is found. Purchase a new
hose or notify an authorized service center for exami-
nation or repair.
n
Release all pressures within the system slowly.
Dust
and debris may be harmful.
n
Store idle tools out of the reach of children and
other untrained persons.
Tools are dangerous in the
hands of untrained users.
n
Maintain tools with care.
Follow maintenance instruc-
tions. Properly maintained tools are easier to control.
n
Check for misalignment or binding of moving parts,
breakage of parts, and any other condition that
may affect the tool’s operation. If damaged, have
the tool serviced before using.
Many accidents are
caused by poorly maintained tools.
