12
13
TANK
PRESSURE
GAUGE
n
Insert thread end of hose into open end of air outlet fit-
ting. Use open-end wrench to tighten securely.
NOTE:
Be careful not to allow threads to become
cross-threaded.
n
Attach quick coupler to open end of hose and tighten
securely.
WARNING:
Do not attach air chuck or other tool to the open end of
the hose until start-up has been completed.
n
Firmly grasp the open end of the hose; hold facing
away from yourself and others.
BREAKING IN THE PUMP
See Figures 6 - 7.
n
Check and tighten all bolts, fittings, etc.
n
Turn the pressure regulator knob fully clockwise to
open the air flow. Turn the locking nut clockwise to
lock.
n
Place the switch in the
OFF
position and plug in the
power cord.
n
Open the drain valve completely.
n
Turn the air compress
ON ( l )
and run the air compres-
sor for 10 minutes to break in pump parts.
n
Place the switch in the
OFF
position.
n
Close the drain valve.
Fig. 6
Fig. 7
60
40
80
4
6
2
10
12
bar
psi
100
120
14
0
60
40
80
4
6
2
10
12
bar
psi
100
120
14
0
ON/OFF
SWITCH
SAFETY
VALVE
PRESSURE
REGULATOR KNOB
REGULATOR
PRESSURE GAUGE
AIR
OUTLET
DRAIN
VALVE
ASSEMBLY
AIR OUTLET FITTING
HOSE
Fig. 4
Fig. 5
COUPLER
HOSE
LOCKING
NUT
