PROBLEMS
If you have problems with the
FS/2
, TELL YOUR
SYSTEM PROVIDER, but here are a few quick
checks:
●
If the unit will not turn on, check the batteries’
orientation and try a fresh set of batteries.
●
If you cannot read the display, try adjusting the
screen contrast: hold down either
S
(SHIFT) key
and press
U
or
D
.
●
If you drop the unit and it stops working, try
turning off and on, and check the batteries.
●
Your application may provide a RESET facility.
●
If the unit is very dirty or wet, clean it as
described in CLEANING.
CAUTION: There are no user serviceable parts
inside the FS/2. Do not attempt to open.
Electromagnetic Compatibility
The
FS/2
complies with EN55022 Class B.
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
If the
FS/2
does cause harmful interference, turn it off and consult
your dealer or technician for help.
The
FS/2
must only be used with approved peripherals and
approved A.C. adaptors; shielded communications cables must be
employed.
Changes or modifications could void the user’s authority to operate
the equipment.
Printed in England
P-2240-0010
Copyright 1993 Husky Computers Ltd
Issue 1
