background image

 16

Checking the safety valve

DANGER:

 Do not tamper with the safety valve. Items 

loosened from this device could fly up and hit you. Failure 
to heed this warning could result in death or serious 
personal injury. The safety valve automatically releases air 
when the receiver pressure exceeds the preset maximum. 
Check the valve before each day of use by pulling the ring 
by hand.

WARNING:

 If air leaks after releasing the safety valve 

ring or if the valve is stuck, do not use the air compressor 
until the safety valve has been replaced. Using the air 
compressor in this condition could result in serious 
personal injury.

 

Set the AUTO ( I ) / OFF ( O ) switch (1) to the 
on position, and wait for the tank to fill. The 
compressor automatically shuts off when the 
pressure reaches the preset maximum.

 

Set the AUTO ( I ) / OFF ( O ) switch (1) to the 
off position.

 

Pull the ring on the safety valve (2) for 20 
seconds to release the air.

 

Release the ring. Air stops escaping at 
about 20 psi. If air continues to escape after 
releasing the safety valve ring, discontinue 
use and seek service before using the air 
compressor again.

1

2

Running the air compressor

WARNING:

  Always ensure the switch is in the OFF 

position and using a regulator (not supplied) ensure 
pressure gauge reads zero before changing air tools or 
disconnecting the hose from the air outlet. Failure to do so 
could result in possible serious personal injury.

WARNING:

  Your tool may require more air consumption 

than this air compressor is capable of providing. Check tool 
manual to avoid damage to the tool or risk personal injury.

NOTE:

 Always use the minimum amount of air flow 

using a pressure regulator (not supplied). Using a higher 
pressure than needed will drain air from the tank more 
rapidly and cause the unit to cycle on more frequently.

 

Never leave the unit plugged in and/or running 
unattended.

 

When finished, always drain the tank and unplug 
the unit if applicable.

Operation (continued)

WARNING

:

 Risk from noise. Use ear protection (ANSI 

S12.6 S3.19), as air flow noise is loud when draining.

Содержание 911-625

























































Отзывы: