6
7 HUSKYTOOLS.COM
Please contact 1-888-HD-HUSKY for further assistance.
For installation instruction
videos visit us at:
www .husky .com
Husky Wall Trim Options
TRIM CORNERS, END CAPS, DOORS & WINDOWS
TRIM OUTLETS & SWITCHES
Interior Corner
Front View
Rear View
Installation Order
Finished Outlet/Switch
Exterior Corner
End Cap
Side
Trim
Door or
Window
Door or
Window
Frame
Measure AC outlet cover.
Cut out a hole in Slatwall
panel .25” larger than the
outlet cover.
Cut extra side trim pieces
at
45 degree
angle to fit in
the hole you just cut in the
Slatwall panel.
(Hint: cut side trim pieces a bit
longer than they need to be,
then make smaller cuts until
you get a perfect fit.
Place Velcro or adhesive
pads on the rear of the side
trim pieces.
Install trim pieces in the
order shown (1, 2, 3)
Outlet or light switch should
look smooth and finished.
Velcro or adhesive pads will
help hold trim pieces securely
in place.
Note
: make sure
screw is flush
otherwise
Husky Wall
panel will
not fit properly.
Side
Trim
Insert
Velcro
Installation - [For 2 Pack & 4 Pack]
7
Securing the bottom panel
□
Install screws (FF) in bottom panel (EE) again where indent
is located and where you have marked the studs.
8
Single column Husky wall
□
If you are only creating a single column
Husky Wall (EE) skip to Step 10.
Multiple column Husky wall
□
If you are creating a Husky Wall (EE) with multiple
columns, add dowels (DD) in each hole with retaining
rings (GG) in middle of each prior to connecting the next
panel and repeat Step 6 until all panels are installed.
9
Installing the bottom rail pieces
□
Install bottom rail (AA) pieces by simply placing them in
bottom panel (EE) (where screws are installed) and firmly
pushing and locking them in.
10
Installing the side trim
□
Use a long piece of side trim (CC) and cut to size (hack saw
or other appropriate saw for cutting PVC). Install the side
trim Velcro insert (HH). Press Velcro insert(s) into the holes
on the Husky Wall panel (EE) edge. Remove the adhesive
cover on Velcro and then push the side rail (CC) onto
the adhesive until it sticks securely.
FF
EE
EE
EE
EE
DD
GG
EE
EE
BB
BB
AA
EE
CC
HH
EE
CC
