17
HUSKYTOOLS.COM
Please contact 1-888-43-HUSKY for further assistance.
Assembly
1
Assembling the air compressor unit
WARNING:
Never use plastic (PVC) pipe for compressed
air. Serious injury or death could result.
WARNING:
Never install a shut-off valve between the
compressor pump and the tank. Personal injury and / or
equipment damage may occur. Never use reducers in
discharge piping.
NOTE:
Do not overtighten. Over the life of the unit, you will
clean or replace the fi lter as needed.
This air compressor unit can be installed as part of an air
distribution system. Any tube, pipe, or hose used in an air
distribution system must have a pressure rating higher than
175 psi. The minimum recommended pipe size is 3/4 in. Using a
larger diameter pipe is always better.
Use thread sealant tape on all the threadded connections of the air
compressor unit (A). This will prevent any air leaks between the
assembled parts.
□
Screw the air fi lter (B) onto the pump air intake.
□
Install the proviced reducer (BB) into the discharge port of
the tank.
□
Attach the nipple (CC) to the reducer (BB).
□
Connect the shut-off valve (DD) to the nipple (CC).
B
A
A
DD
CC
BB
