Husky 1254-06, Руководство пользователя

Страница: 6 / 24

5
Before operating the tractor, the operator should become
familiar with the function and location of each control to
ensure proper and efficient operation.
The following listed numbers and accompanying informa-
tion correspond to those numbers assigned to the controls
indicated in Figure 3.
Figure 3
1. CHOKE.
Choke lever UP towards the "ON" position closes choke for
starting. Choke lever DOWN to "OFF" position opens
choke for operation.
2. AMMETER.
Indicates rate of charge to or discharge from battery.
3. IGNITION-STARTER SWITCH.
Turn ignition key to the right to start engine. Release when
engine starts.
4. THROTTLE.
Move throttle lever "UP" one-half way for starting.
5. CLUTCH / BRAKE PEDAL.
To shift gears, depress clutch pedal fully. This disengages
the clutch, and fully applies brake.
6. GEAR SHIFT LEVER.
For selection of 1st, 2nd, 3rd and reverse gear.
7. TWO SPEED RANGE LEVER.
High and low range. Provides a range of 6 speeds ahead, 2 in
reverse.
8. P.T.O. (POWER TAKE OFF) CLUTCH.
Push forward to engage and pull back to disengage power to
attachments.
9. PARKING BRAKE.
To apply parking brake, pull knob up and move it to the
right. To release pull knob up and move it to the left.
10. ATTACHMENT LIFT LEVER.
When adjusting height of attachments, push thumb button
on top of lift lever to unlock. Six positions available.
11 . LIGHT SWITCH.
Pull switch knob out to turn on lights, push in to turn lights
off.
CONTROLS
LOCATION & FUNCTION