background image

PD_3005 REV 0119 - subject to modification.

7

ECO-7EZ - OPERATOR MANUAL   

MODEL: ECO-7EZ

 

ɨ

Use power tools only with specifically designated battery packs. Use of any other battery packs may 
create a risk of injury and fire.

 

ɨ

Under abusive conditions, liquid may be ejected from battery; avoid contact. If contact accidentally 
occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from 
the battery may cause irritation or burns.

Battery and Charger Use and Care

 

ɨ

Before using battery charger, read all instructions and cautionary markings on battery charger, 
battery pack, and product using battery pack.

 

ɨ

To reduce the risk of injury, charge only Huskie Tools battery pack model BP-185. Other types of 
batteries may burst causing personal injury and damage.

 

ɨ

Do not leave charger and battery pack exposed to rain or snow, submerge in water, or stored in 
damp or wet locations.

 

ɨ

To reduce risk of damaging the electric plug and cord, pull by plug rather than cord when 
disconnecting charger.

 

ɨ

Make sure cord is located so that it will not be stepped on, tripped over, or otherwise subjected to 
damage or stress.

 

ɨ

Do not disassemble charger or battery pack, contact Huskie Tools service dept. at 800-860-6170 
when service or repair is required. Incorrect reassembly may result in a risk of electric shock or fire.

 

ɨ

Do not store the tool and battery pack in locations where the temperature may reach or exceed 50°C 
(122°F) (such as a metal tool shed, or a car in the summer), which can lead to deterioration of the 
storage battery.

 

ɨ

Do not charge battery pack when the temperature is below 0°C (32°F) or above 40°C (104°F). This is 
very important to maintain optimal condition of the battery pack.

 

ɨ

The charger is designed to operate on standard 120V AC electrical power only. Do not attempt to use 
it on any other voltage.

 

ɨ

Charge the battery pack in a well-ventilated place, do not cover the charger and battery pack with a 
cloth, etc., while charging.

 

ɨ

Use of an attachment not recommended may result in a risk of fire, electric shock, or personal injury.

 

ɨ

Do not short the battery pack or allow metal objects to touch the terminals. A battery short can cause 
a large current flow, overheating and create the risk of fire or personal injury.

 

ɨ

Huskie Tools is not responsible for any damage or accident caused by the use of recycled or 
counterfeit battery pack.

 

ɨ

Do not incinerate the battery pack or dispose of the battery pack in a fire or expose it to excessive 
heat.

 

ɨ

Do not charge the battery pack in a high-temperature location, such as next to a fire or in direct 
sunlight. Otherwise, the battery may overheat, catch fire, or explode.

 

ɨ

After removing the battery pack from the tool or the charger, always re-attach the pack cover. 
Otherwise, the battery contacts could be shorted, leading to a risk of fire.

Содержание Pro Line 7 Series













Отзывы: