HURTLE HURVBTR36, Руководство пользователя

Страница: 6 / 10

5. To attach the optional resistance bands, locate the two metal connectors
on the underside of the unit, one on either side of the control panel. Rotate
these connectors until they extend outward, becoming visible even after
you set the platform back down onto the floor.
6. Use the clasp at one end of each resistance band to attach them to the
metal connectors on either side of platform's control panel.
WORKOUT RECCOMENDATIONS
Note:
While any Automatic mode is in operation, massage speed and time
selections are disabled.
5. During any massage program, press to scroll through display of calories
burned, vibration speed, and time elapsed.
6. To end your massage at any point, press
SETUP
1. Locate the handle underneath one edge of the platform. Tilt this entire
platform upward to form a 45° angle with the floor beneath. With the
weight of the platform now on its wheels, pull to draw the handle out to its
full length. Grasp the handle to move the entire unit to your desired
placement location.
2. Set the platform onto a smooth, level surface. To prevent possible injury,
leave atleast 3 feet of space on either side.
3. Unwind the power cord and insert the plug into an electrical outlet.
4. Insert 2 AAA batteries into the battery compartment of the remote control.
• Batteries should be recycled or disposed of as per state and local guidelines.
• Install only new batteries of the same type in your product.
• Failure to insert batteries in the correct polarity, as indicated in the battery
compartment, may shorten the life of the batteries or cause batteries to leak.
• Do not mix Alkaline, Standard (Carbon-Zinc) or Rechargeable (Nickel
• Cadmium) or (Nickel Metal Hydride) batteries.
• Do not dispose of batteries in fire.
www.PyleUSA.com
7
www.PyleUSA.com
6
Progmm 4 (P4):
Interval training. P4 will follow a slow/fast pattern,
switching each minute, with a maximum speed of
30.
STANDING POSITION (5 minutes)
Stand on the platform with your feet shoulder-width apart,
gripping the handles securely with both hands. This position
works muscles in the back, waist, glutes, chest, and stomach.
STANDING POSITION (2 minutes)
Stand on the platform with your feet a bit wider apart than
shoulder -width. Bend your knees to lower height about 6
inches. This position works muscles in the glules, thighs, and
along the vertebrae.
TIP TOE POSITION (2 minutes)
Stand on the platform with your feet a bit wider apart than
shoulder -width. Bend your knees to lower your body height
about 6 inches. Lift your heels off of the platform, shifting your
weight onto your toes. This position works muscles in the feel,
glutes, thighs, and along the vertebrae.
STARTING BLOCK POSITION (2 minutes)
Lower your self onto the floor next to the unit, and place your
palms onto the platform. Lean your upper body forward, keeping
both legs slightly bent, your front leg at a sharper angle than your
back leg. This position works muscles in the shoulders, back, and
arms.