HURTLE HURVBTR36, Руководство пользователя

Страница: 5 / 10

a. In Manual Mode (P1), the timer can be set between 1 and 20 minutes.
Press to add time in increments of 1 minute.
b. In Manual Mode (P1), vibration speed can be adjusted in increments
between 1 and 40 using or
4. To use one of the automatic programs, press . Each press cycles through
one of the Program Modes: P2, P3, and P4 are pre-set programs. Each auto
program is 10 minutes long, and features vibration speeds that vary in
intensity through out. (Returning to P1 will return you to Manual Mode.)
AUTOMATIC PROGRAMS
Note:
Program 1 (P1) is considered "
manual mode
." It will start at speed
level1 and will run for 10 minutes. Follow instructions to manually adjust the
speed and duration settings for P1.
CONTROL PANEL AND REMOTE CONTROL
OPERATION
1. Insert the Fitness Machine's power plug into a standard electrical outlet.
2. Flip the power switch to the "
ON
" position. The unit will enter "
Standby
"
mode, indicated by a couple of beeps and four horizontal dashes on the
control panel.
Steps below can be conducted using either the keys on the control panel
or on the remote control:
3. Press to begin operation. Vibrating action begins in Manual mode P1,
initially set at Speed 1, running for 10 minutes.
www.PyleUSA.com
5
www.PyleUSA.com
4
SPEED
SPEED
ON/OFF
SCAN
TIME
PROG
Program 2 (P2):
Quick climb and cool down. P2 will start at speed 2
and increase 5 speed levels per minute until it
reaches speed 30. In the final 3 minutes, speed will
be gradually reduced.
Progmm 3 (P3):
Gentle climb. P3 will start at speed 4 and will gently
raise to a maximum speed of 36.