Hurricane HAKS-I-4035, Оригинальное руководство пользователя

Страница: 38 / 128

36
Personal protective equipment
Wear a helmet at all times when operating the machine.
A helmet, equipped with mesh visor, can help reduce the
risk of injury to the face and the head if kickback occurs.
Wear ear protectors. Exposure to noise can cause hearing
loss.
Good quality personal protective equipment, as used
by professionals, will help reduce the risk of injury to
the operator. The following items should be used when
operating the machine:
Safety helmet
should comply with EN 397 and be CE marked
Hearing protection
should comply with EN 352-1 and be CE marked
Eye and face protection
should be CE marked and comply with EN 166 (for safety
glasses) or EN 1731 (for mesh visors)
Gloves
should comply with EN381-7 and be CE marked
Leg protection (chaps)
should comply with EN 381-5, be CE marked and provide
allround protection
Chain saw safety boots
should comply with EN ISO 20345:2004 and be marked
with a shield depicting a chain saw to show compliance
with EN 381-3. (Occasional users may use steel toe-cap
safety boots with protective gaiters which conform to
EN 381-9 if the ground is even and there is little risk of
tripping or catching on undergrowth)
Chain saw jackets for upper body
protection
should comply with EN 381-11 and be CE marked
Know your Chain saw
1
Trigger Release
2
Switching on/off
3
Chain Drive
4
Bar Groove
5
Rear Handle
6
Battery
7
Front handle
8
Front Hand Guard /
Chain Brake
9
Chain Lubricant Cap
10
Guide Bar
11
Saw Chain
12
Guide Bar Cover
13
Chain tensioner wheel
5
7 8 6 9
11 12
10
13
2
1 3
4
WARNING
Consequences of improper maintenance, removal
or modifi cation of safety features like the chain
brake, ignition switch, hand guard (front and back),
spiked bumper, chain catcher, guide bar, low kick-
back saw chain may cause the safety features to not
function correctly, thus increasing the potential for
serious injury.
Low kick-back saw chain
A low-kick-back saw chain helps to reduce the possibility
of a kickback event.The rakers (depth gauges) ahead of
each cutter can minimize the force of a kick-back reaction
by preventing the cutters from digging in too deeply.
Only use replacement guide bar and chain combinations
recommended by the manufacturer.As saw chains are
sharpened, they lose some of the low kickback qualities
and extra caution is required. For your safety, replace saw
chains when cutting performance decreases.
EN ENGLISH
HURRICANE_HAK-S-I_Kettensaege_2x20V_1-3.indd 36 20.06.19 15:00