HUROM HJ SERIES, Руководство пользователя

Страница: 13 / 32

Hopper
Strainer
Chamber
Spinning brush
www.hurom.com I 09
SLOW JUICER ASSEMBLY IN DETAIL
Firmly insert the extraction seal located at the bottom of the chamber into the pulp outlet.
Make sure the outer groove of the chamber is completely aligned with the base ridge.
1
Assemble the parts in the order of chamber>spinning brush>strainer>squeezing auger>hopper. When assembling the spinning
brush, line up the strainer ridge with the inner groove of the chamber. Align all arrows on the chamber, strainer and hopper.
2,3
Chamber outer groove
Base ridge
Strainer
ridge
BOTTOM
OF THE
STRAINER
INSIDE
THE
CHAMBER
Chamber inner
groove
Extraction
seal
Hopper
rear arrow
Align the hopper arrow with the base arrow located at the rear of the appliance.
The hopper will not close if the parts are assembled incorrectly.
4
Auger
4PJ12242_V.01.indd 13 2013-07-12 오후 4:51:24