Hurco winmax, Руководство по программированию

Страница: 48 / 254

1 - 28 Overview
704-0115-307
WinMax Lathe NC Programming
NC Editor Settings
The NC Editor Settings screen allows you to set the Block Skip Enable state and adjust
the color of commented text.
Figure 1–14. ISNC NC Editor Settings screen
Fields and softkeys are
• Block Skip Enable—indicates whether blocks with the Ignore character (/)
are interpreted and executed or ignored. Yes (Skip Off) and No (Skip On)
softkeys appear when the cursor is in this field. To change the Block Skip
state,
• Select the Yes softkey to ignore the blocks with the Ignore character
(/). Skip On appears in the status bar.
• Select the No softkey to execute the blocks with the Ignore character
(/). Skip Off appears in the status bar.
• Comment Color—displays the current comment color. The color can be
changed by selecting the Change... screen button or the Change
Comments Color softkey. A window opens with Red, Green, and Blue slide
adjustments for changing the color of comment text.
•
Select OK to save changes and return to the NC Editor Settings screen.
• Select Cancel to close the window without saving changes.
• Current Font—displays the current NC Editor font. To change the font, select
the Change Current Font softkey. A Choose Font window opens with Font
and Size selections. A Sample of the selected font appears in the lower
portion of the window.
•
Select OK to save changes and return to the NC Editor Settings screen.
• Select Cancel to close the window without saving changes.
The OK screen button is inactive if a font size other than a pre-
defined size selected from the list is entered.