Huntleigh Tx 150, Руководство пользователя

Страница: 19 / 32

19
Jib:
Check for:
•
Minimal side movement of the jib and alignment with the centreline
of the hoist
•
Jib is free to rotate on the jib/mast pivot.
•
Wear on the jib/mast pivot.
•
Wear on the actuator mounting plate and retaining pin
•
Correct fitting of the keyrings on the actuator retaining pin.
•
Damage to jib end mouldings.
Maintenance – lubricate jib/mast pivot and actuator mounting. Replace
missing or damaged parts.
Mast:
Check for:
•
Mast fully engaging with the mast spigot.
•
Correct operation of the mast-locking device.
•
Wear on the actuator mounting point.
Maintenance – lubricate the actuator mounting point. Replace missing or
damaged parts.
Electric controls, plugs and sockets.
Check:
•
Emergency Stop button cuts all power. Confirm power is restored
when the switch is reset
•
Handset for correct functioning – raise/lower and leg opening.
•
Fit of the hand control plug and socket.
•
For damage to charging socket.
•
Functioning of the emergency descent button.
•
Fit of actuator plugs and sockets
•
For damage to cables and leads
Maintenance – Replace missing, malfunctioning or damaged parts.
Electric actuator.
Check:
•
Smooth operation in both directions.
•
Power cuts out at the ends of travel.
•
For unusual noise which may indicate future break down
•
Correct functioning of actuators fitted with an emergency down
mechanism.
•
Anti-crush precautions are operational.
Maintenance – No first line maintenance required. Replace if
malfunctioning.