Huntleigh Hydroven 12 LymphAssist Homecare, Инструкция по эксплуатации

Страница: 25 / 40

24
Oper
ation
9. Operation
These instructions cover the day-to-day operation of the LymphAssist system.
Other operations, such as maintenance and repair, should only be carried out
by suitably qualified personnel.
Note: Refer to “Controls, Indicators and Alarms” for a comprehensive
description of the controls and indicators on the pump.
Note: If the operation or performance of the pump changes during
use, refer to “Routine Maintenance” before calling a service
engineer or contacting your local Huntleigh sales office.
WARNING: Bags supplied with this equipment may present a
suffocation risk; to avoid the risk of suffocation, keep the bags
away from babies and small children.
WARNING: Make sure the system is arranged so that the power
cable does not pose a trip or strangulation hazard.
9.1 Preparing the System
1. Remove the system from the packaging. You should have the following
items:
• Hydroven 12 LymphAssist pump.
• Hydroven 12 garment (arm or leg).
• Hydroven 12 garment insert (optional).
2. Make sure the garment is the correct size for the limb, and that a garment
insert is used if necessary (refer to “Garment Dimensions”).
3. Undo the zip on the garment.
4. If a garment insert is to be fitted to the garment, do the following:
• Put the garment insert in between the two halves of the
garment zip. Make sure the orientation of the garment and insert are
correct: the two tubesets should be at the same end and on the
outside of the garment and insert.
• Fully fasten one of the zips between the garment and insert, leaving
the other unfastened.
5. Before applying the garment (and insert, if fitted) to the limb, zip up the first
150 mm (6”) of the unfastened garment zip. Put the garment (and insert) onto
the limb and fully fasten the zip.
6. Make sure the patient is in a comfortable position with the limb supported or
elevated as necessary.