INSTALLATION
5
■
Unpack the top of the shade.
➤
Peel back the plastic tape from the packing rail at the top of the shade.
➤
Peel away the colored tape securing the cords
to the packing rail.
➤
Leave the remaining colored tape which secures the
cords in place. The tape will be removed later.
➤
Rotate the stationary rail hanger out of the top packing
rail. Slide the rail from the shade. Discard rail.
Mount the Installation Brackets
■
Measure and mark the ordered
height (found on the label inside
the headrail) plus
½
" from the
fl oor surface. Install the brackets
at this height for the minimum
recommended
½
" floor clearance.
➤
Add more to the ordered
height if more floor clearance
is desired.
■
Center the headrail over the
window opening at the marked
height. Use a pencil to lightly mark
each end of the headrail.
➤
Alternatively, measure the width of the headrail. Use this width to mark the headrail end
points over the window opening.
Remove
Stationary
Rail Hanger
Packing
Rail
Floor Surface
Ordered
Height
+ ½"
Installation
Bracket
Height
