HunterDouglas SOLERA, Установка, эксплуатация и уход

Страница: 17 / 24

OPERATION
15
Further Operation and Programming Information
PowerView
™
Pebble
™
Remote and/or PowerView Surface Remote Operation
For information regarding operation and programming of the PowerView remote, refer to your
PowerView Motorization Remote Control Guide .
PowerView Scene Controller
For information regarding operation and programming of the PowerView Scene Controller, refer
to your
PowerView Motorization Scene Controller Guide .
PowerView App Operation
PowerView Hub is required for PowerView App operation. For information regarding setup
and operation using the PowerView App, refer to the online
PowerView App Software Guide at
hunterdouglas.com/powerview/support
.
Resetting the Shade (If Necessary)
If you need to reset a shade’s travel limits:
Basic Reset
The basic reset is used to reset the shade’s travel limits. This procedure will also reset the
♥
FAVORITE position to its default (shade closed halfway).
Bottom-Up shades:
1. Press and hold the manual control button for 6 seconds. The shade will move slightly.
2. Release the manual control button. The shade will raise to its fully open position to set the
upper travel limit, then lower to the fully closed position to set the lower travel limit. The shade
will move slightly one more time to indicate that the travel limits have been reset.
Top-Down/Bottom-Up shades:
1. Press and hold the manual control button for 6 seconds. The shade will move slightly.
2. Release the manual control button. The middle rail will raise to the top, followed by the bottom
rail, opening the shade bottom-up to set the upper travel limits. The bottom rail will then
lower, followed by the middle rail, opening the shade top-down to set the lower travel limits.
The shade will move slightly one more time to indicate that the travel limits have been reset.