HunterDouglas SOLERA, Установка, эксплуатация и уход

Страница: 12 / 24

INSTALLATION
10
Plug the Power Cable into the Battery Wand
■
On the back of the headrail, connect the power cable (coming from the shade) into the
socket on the battery wand.
Proceed to “Testing the Shade” on page 13.
If You Have a Satellite Battery Pack...
Mount the Satellite Battery Pack
■
Decide where you want to attach the wall mount bracket.
A satellite battery pack may be mounted in any orientation.
■
Mark the screw holes.
■
Drill the screw holes using a
3
/
32
" drill bit.
■
Remove the backing from the double-sided tape. Press the bracket into place.
■
Attach the bracket using the screws provided.
■
Position the battery wand so the power cable is easily connected to the socket.
■
Snap the battery wand into the bracket.
■
Install the battery wand cover with the slot aligned
to the socket in the battery wand.
■
Plug the power cable from the shade into the
extension cable.
■
Plug the other end of the extension cable
into the socket in the battery wand.
■
Secure the power supply cable using wire
retainers (not supplied). If hiding the cable
behind the shade, make sure it does not impede
the operation of the shade.
Proceed to “Testing the Shade” on page 13.
Wall Mount Bracket
Socket
Battery Wand Cover
Socket
Slot
Battery Wand Cover
Extension
Cable
Power Cable
from Shade