INSTALLATION
7
Attach the Installation Brackets
■
Center the installation brackets on your marks and mark the location of the screw holes.
➤
The installation brackets must be mounted
level for the unit to operate correctly.
Do not mount installation brackets on
curved molding.
➤
The top of the installation brackets need to
be mounted at the ordered height minus
7
⁄
8
". If the ordered height does not allow for
floor clearance, subtract only
3
⁄
8
" for
1
⁄
2
" of
floor clearance.
■
Use a
3
⁄
32
" drill bit to drill the screw holes. Mount into
wood whenever possible.
WARNING:
Product is heavy. Mount into
wood/metal studs or into concrete with
concrete anchors. Drywall anchors are not
recommended.
■
Attach the installation brackets using the screws
provided.
➤
The brackets must be level and aligned.
Mount the Headrail
IMPORTANT:
The headrail must be mounted level for the drapery to operate correctly.
Use your level to check that the installation bracket mounting clips are aligned and level.
■
Orient the headrail so that the control side is located on the correct side.
■
Center the headrail underneath the mounting clips.
➤
Ensure that all the mounting clips on the valance board are oriented with the hook
toward the front and the release tab toward the window.
■
Starting with the center, tilt the headrail
and hook the mounting clips into the front
groove of the headrail.
■
Rotate the headrail upward and snap it
into place.
■
Make sure the headrail is secure.
NOTE:
With outside mounts, the valance
is attached after the drapery is installed.
Ordered
Height
Mark Ordered
Height -
7
⁄
8
Wall
Outside Mount
Inside Mount
Headboard
Front
Front
Mounting
Clip
Mounting
Clip
Headrail
Headrail
Hook into
the front
groove of
the headrail.
Hook into the front
groove of the headrail.
Snap Into Place
Snap Into Place
