INSTALLATION
8
Connect the Receiver (If Not Already Connected)
IMPORTANT:
Connect the receiver before connecting the DC power supply.
■
Plug the 10-pin receiver connector into the motor housing.
CAUTION:
The receiver connector can only be inserted one way.
Do not force the connector into the motor housing.
■
Snap the cover into place over the motor.
■
Plug in the 10-pin receiver connector to the receiver.
Mount the Receiver
■
Remove the double-sided tape from the back of the
receiver.
■
We recommend mounting the receiver to the bottom of
the motor cover.
■
Check that the wire is not caught or pinched in the
mounting brackets or the headrail.
Install the DC Power Supply
NOTE:
Make sure power cord and extension cable do not get pinched in the motor cover.
■
Plug the power cable with the barrel
connector from the motor into the
extension cable.
■
Plug the other end of the extension cable
into the DC power supply.
■
Secure the DC power supply wire using
the C-clips provided. Hide the wire
behind the fabric, making sure it does
not impede operation.
■
Space the C-clips approximately 15" apart along the DC power supply wire, as shown.
■
Plug the DC power supply into the AC outlet.
WARNING:
Keep cables and small parts out of the reach of children. They can
wrap cables around their necks and
STRANGLE
. They can also put small parts in
their mouths and
CHOKE
.
WARNING:
Electric shock and/or a fire hazard may occur if not properly installed.
Barrel
Connector
Extension
Cable
DC
Power
Supply
Extension
Cable
