HunterDouglas PowerView Pebble, Руководство пользователя

Страница: 19 / 21

What is a PowerView
®
Shade Network?
The PowerView
®
Shade Network is a unique radio frequency that
allows PowerView
®
Automation devices to communicate with
each other within a home. All PowerView devices within a home
should be added to the same PowerView Shade Network. This
allows for easy installation of additional control options, such as the
PowerView
®
Hub, PowerView
®
Repeaters and PowerView
®
Scene
Controllers. Additionally, remotes joined to the same PowerView
Shade Network will be able to operate all window coverings in the
PowerView Shade Network as desired.
Troubleshooting
1.
None of the backlit buttons illuminate on my remote
when I press the buttons.
• Check to make sure the batteries are inserted properly
and are new.
• Join an existing PowerView Shade Network with the remote.
2.
I programmed my window covering to work from two different
remotes. The window covering works well with the second
remote, but will no longer respond to the first remote.
• Check to make sure the batteries in both remotes are
inserted properly and are new.
• All PowerView remotes within a home need to be included
in the same PowerView Shade Network. Refer to “Pairing
additional remote(s) to the PowerView Shade Network”
on page 14.
35
TR
O
UBLESH
O
O
TING
34
TR
O
UBLESH
O
O
TING
3.
My window covering does not respond when I press
OPEN or CLOSE.
• Make sure that there is power to the window covering and
that the window covering functions properly by pressing
the programming button on the window covering.
• Make sure the correct GROUP number or ALL has
been selected before pressing OPEN or CLOSE.
Active GROUP buttons will be backlit.
• Add the window covering(s) to a GROUP on the remote.
Refer to “Join a window covering to a GROUP” on
page 19.
4.
My window covering operates when I press OPEN
or CLOSE, but not when I press either of the arrow
buttons.
• The arrow buttons are for operating Top-Down/Bottom-Up
shades, Duolite
®
shades, shutters and shadings or
sheers with operable vanes/louvers only. Refer to the
product’s Installation, Operation and Care instructions
for proper operation.
• If the window covering is a Top-Down/Bottom-Up shade,
a Duolite shade, shutter or a shading or sheer with
operable vanes, reset the travel limits on the window
covering. Press and hold the programming button on the
window covering for 6 seconds, until it jogs. The window
covering will then run an auto-calibration sequence.
NOTE: Please call 1-844-PWR-VIEW or visit
www.hunterdouglas.com for additional troubleshooting
support.