This procedure can be skipped for a fresh out of the box motor.
The motor will jog 2x when receiving any PowerView® command (e.g. Pressing the manual control button on the motor),
to con
fi
rm no limits are set.
1.2.1
Remove power
from the motor by disconnecting the
power cable from the battery wand or power supply
and
wait for 20 seconds
.
1.2.2
Press and hold
the
manual control button
on the
motor.
1.2.3
Reconnect power
to the motor while
press and hold
the
manual control button
.
MANUAL
Page 4 of 30
version: 1.2
