INSTALLATION
13
Adjust the Headrail Tightness
■
If the headrail is loose in the end brackets, bend
the tabs on the end brackets outward.
NOTE:
The tabs may also be bent inward if the
headrail is difficult to install into the end brackets.
Close the End Brackets
■
Push the cover down until it snaps over the locking
tab on the bottom of the end bracket.
Open the End Brackets (If Necessary)
■
To open the end brackets, insert a flat blade screwdriver
between the bottom of the cover and the quick release tab,
and twist.
➤
You can also push up on the bottom of the end bracket to
release the locking tab.
Proceed to “Complete the Installation” on page 13.Complete the
Installation