INSTALLATION
10
Attach the Magnetic Valance Clips to the Valance
■
Lay the valance face down on a protected
surface with the back side up.
■
Insert the clip dovetail into the valance
groove.
■
Twist the clip until it is straight with the
clear tabs at the top of the valance.
➤
There are at least two clips per valance.
For valances narrower than 36", position
clips 5
1
⁄
2
" in from the ends of the valance.
For valances 36" or wider, position the
clips 10" in from the ends of the valance.
Additional clips should be spaced evenly
between the two end clips.
