Release
the
manual control button
.
The motor LED turns red to acknowledge the
motor is in program mode
6.2.4
Use the
open
,
stop
and
close
buttons to
move the blind to the new
bottom
position. Use the
arrow up
and
arrow down
buttons to
fi
ne-tune.
6.2.5
Press and hold
the
stop
button for 6 seconds.
DO NOT select a group on the remote!
Keep pressing until the remote lights start
blinking
IMPORTANT
Watch out to perform steps 5.2.6 and 5.2.7 within 3 seconds!
MANUAL
Page 16 of 23
version: 1.0
