HunterDouglas Duette Скачать руководство пользователя страница 9

Страница: 9 / 16

INSTALLATION

Install the Shade

■

Insert the front channel on top of the headrail onto the front
lip of the mounting brackets.

■

Rotate the headrail up and back until it snaps into place.

■

Check to ensure the headrail is securely in the brackets.

➤

Check that the bottom of the headrail is snapped into
the base of each bracket.

➤

Check that the front lip of each bracket is in the front
channel of the headrail.

■

Lower the bottom rail and snap the rail clips onto the side track clips. Adjust the rail clip
positioning on the bottom rail to align with the track clips.

➤

For Top-Down/Bottom-Up shades, snap the rail clips on both the middle and bottom rails
onto the track clips.

The back of the headrail

snaps into the bracket.

The front of the bracket

fits under the groove.

Headrail

Bracket

Snap

in Place

Good

Bad

Содержание Duette

















Результаты поиска

Содержание Duette

Отзывы:

Похожие инструкции для Duette

Бренды по названию

Популярные бренды

HunterDouglas Duette, Установка Эксплуатация Уход

Результаты поиска

Содержание Duette

Отзывы:

Похожие инструкции для Duette

Бренды по названию

Популярные бренды