10
REMOVE THE SHADE
Lower the shade approximately 4".
While holding the front of the
headrail for support, use a standard
fl at blade screwdriver and insert it
between the bottom of the bracket
and the back of the headrail, as
shown. Twist the screwdriver to
release the back edge of the headrail.
After releasing the back edge, roll the
back of the headrail downward and
out from the bracket.
If the bracket is stiff, the headrail may be difficult to remove. Use a flat blade
screwdriver wrapped in a soft cloth and push the blade against the bottom tab of
the mounting bracket.
CAUTION:
Be careful not to scratch the fi nish on the back of the headrail.
OPERATING THE SHADE
For better support and smoother operation, use the handle when raising and lowering
the shade.
■
■
■
■
Back Of Shade
Push back against the tab using your
thumb or a wrapped screwdriver blade.
After releasing the
bottom tab, the
headrail will drop.
Bottom
Tab
1
2
To Raise the Shade
Slowly and steadily push
up on the bottom rail
handle. Allow the shade
to stack evenly.
•
To Lower the Shade
Slowly and steadily pull
down on the bottom
rail handle.
•
