24
Easy Retrieve™ Program Memory
The X-Core
®
is capable of saving the preferred watering program into
memory for retrieval at a later time. This feature allows for a quick
way of resetting the controller to the original programmed watering
schedule.
To save the program into the memory
1. With the dial in the
RUN
position, press and hold the and
buttons for 5 seconds. The display will scroll three segments
from left to right across the display indicating the program is being
saved into memory.
2. Release the and buttons.
To retrieve a program that was previously saved into memory.
1. With the dial in the
RUN
position, press and hold the and
buttons for 5 seconds. The display will scroll three segments
from right to left across the display indicating the program is being
saved into memory.
2. Release the and buttons.
Programmable Delay Between Stations
This feature allows the user to insert a delay between stations
between when one station turns off and the next one turns on.
1. Start with the dial in the
RUN
position.
2. Press and hold the button down while turning the dial to the
RUN TIMES
position.
3. Release the
button. At this point the display will show a delay
time for all stations in seconds, which will be flashing.
4. Press the
or buttons to increase or decrease the delay time
between 0 and 4 hours.
5. Return the dial to the
RUN
position.
Clearing the Controller’s Memory/Resetting
the Controller
If you feel you have misprogrammed the controller, there is a process
that will reset the memory to the factory defaults and erase all
programs and data that have been entered into the controller.
1. Press and hold the button.
2. While holding the button press the RESET button for 3 seconds,
then release the RESET button while continuing to hold the
button.
3. Continue holding button until time is displayed (this takes about
8 seconds).
ADVANCED FEATURES
Содержание X-Core XC-401i-E
Страница 34: ...32 NOTES ...
Страница 35: ...33 NOTES ...