background image

15

45005-01  •  08/25/10  •  Hunter Fan Company

Hunter fans have the power to cut your cooling costs up to 40%. 

Beat the High Cost of Cooling 

The air movement created by a Hunter ceiling fan lets you set your 
thermostat higher and still stay comfortable. Every degree you 
raise the thermostat saves up to 7% on energy costs. So, you can 
cut back on expensive air conditioning...and save up to 40%* on 
cooling. In winter, your Hunter fan recirculates warm air and saves 
up to 10%* on heating bills.

* On average at low speed settings. Your savings may vary based 
on climate, building type and thermostat setting. 

Save Energy and Money While Protecting the Environment 

Congratulations! You’re saving energy and money while protecting 
the environment by purchasing this ENERGY STAR qualified 
Hunter ceiling fan! With this purchase, you are doing your part to 
protect the environment. In 2010, ENERGY STAR qualified ceiling 
fans are projected to cut air pollution by more than 500 million 
pounds! 

Your new ceiling fan has earned the ENERGY STAR label 
because it meets high energy efficiency specifications set by 
the Environmental Protection Agency (EPA). ENERGY STAR 
labeled ceiling fans save energy because they have more efficient 
fan motors and air delivery due to more aerodynamic blade 
configurations. Ceiling fan models bearing the ENERGY STAR label 
move air 14 - 20% more efficiently than typical ceiling fan models. 
For more information on ENERGY STAR visit www.energystar.gov.

Содержание Type T series

















Отзывы: