7
ENG
Stake Mounting Method (Figure 3)
The universal mounting adapter can also be used to stake
mount the SVC.
1. Cut a section of ½" diameter plastic pipe.
2. Drive the pipe into the ground inside the valve box to
the desired height of the controller.
3. Slip the mounting adapter on top of the pipe.
4. Attached the SVC to the mounting clip and slide onto
the adapter.
A Hunter Mini-Clik
®
rain sensor can be connected to the
SVC. The purpose of this sensor is to stop watering when
weather conditions dictate.
NOTE: When the Rain Sensor is interrupt-
ing the watering, the display will show the
System Off icon
, “OFF” and
on
the display.
1. Cut the yellow wire loop attached to the SVC at approxi-
mately the middle of the loop.
2. Remove approximately ½" (13mm) of insulation from
each wire. Attach one yellow wire to each of the wires
of the weather sensor. You can mount the rain sensor
up to 100 feet from the SVC controller (18 GA minimum
wire size).
3. Secure wire connec-
tions with waterproof
connectors.
Mounting Clip
Mounting
Adapter
Plastic Pipe
Figure 3
CONNECTING A WEATHER SENSOR
Hunter Model Mini-Clik
®
Содержание SVC
Страница 2: ......
