Hunter SVC-100, Руководство пользователя

Страница: 35 / 40

®
32 33
2. Squeeze the Transmit/Receive button on
the handle of the WVP for 2 seconds.
The WVP will beep twice indicating that
communication is taking place.
3. After a few seconds, dashed
lines will appear on the
display indicating that radio
communication is being made
with the WVC. When the
last dashed line illuminates,
data transmission is completed and the
WVP will beep twice indicating that data
transmission was successful.
If for any reason that radio connection was
not successful, the WVP will produce a single
two second beep and the No Contact icon
will be displayed in the middle of the display
for a brief period.
If you are experiencing problems contacting
the WVC, make sure you are using the
correct identification code. If communication
problems persist, try moving closer to the
WVC to improve radio contact. The range
of the signal is 100 feet with the WVC
installed in the valve box. Actual
performance varies depending
upon the installation and the
surrounding terrain.
Retrieving Programs
Once the WVC 3-digit identification code is
entered into the WVP:
1. Press the button on the
WVP to select the receive
function (the will be
flashing).
2. Squeeze the Transmit/Receive button on
the handle of the WVP for 2 seconds.
The WVP will beep twice indicating that
communication is taking place.
3. Dashed lines will appear on the display
indicating that radio communication is
being made with the WVC. When the last
dashed line illuminates, data transmission
is completed and the WVP will beep twice
indicating that data transmission was
successful.
4. All current program information and
battery life status from the WVC can now
be reviewed with the WVP, by squeezing
the Transmit/Receive button once, which
returns the unit to the programming mode.
Manual Watering Operation
To activate a Manual Watering:
1. Press the button once to display the
Current Time/Day icon.
2. Press and hold the
button to display the
Manual Watering icon.
Station number 1 will be
displayed along with the
manual run time.
3. Use the button to navigate to the station
you would like to operate manually.
4. Use the or button to adjust the
manual water run time from 1 minute to 4
hours.
5. While in the Manual Watering mode,
squeeze and hold the Transmit/Receive
button for 2 seconds to initiate the watering
cycle.
NOTE: If no buttons are pressed within 5 seconds,
the WVP will revert to the Current Time/
Day.
6. Repeat steps 2 through 5 for each station
you would like to operate manually.
To suspend Manual Watering:
1. With the current time/day showing in the
display, press and hold the button to
enter the manual off mode.
2. Use the button to navigate to the station
you would like to turn off.
3. While in the manual off mode, squeeze
and hold the Transmit/Receive button for 2
seconds to deactivate the manual cycle for
the station selected.
4. Repeat steps 1 through 3 to turn off
additional stations.
Wireless Valve System