Hunter Supreme, Инструкция по эксплуатации

Страница: 19 / 60

4. To ensure accuracy and quality of night time image, mount camera to dark
environment without any obvious light sources.
5. Certain surroundings (like trees, walls, ground, etc.) within flash range can get you
better night time images. Do not aim camera to total open field where there is nothing
within IR flash range to reflect flash back. I
t’s like shinning a flashlight into sky in
night, you just can’t see anything, same does camera.
Photos Do Not Capture Subject of Interest
1.
Check the “Sensor Level” (PIR sensitivity) parameter setting. For warm
environmental conditions set the Sensor Level to “High” and for cold weather set the
sensor for
“Low”.
2. Try to set your camera up in an area where there is not a heat source in the
camera’s line of sight.
3. In some cases, set the camera near water will make the camera take images with
no subject in them. Try aiming the camera over ground.
4. Try to avoid setting the camera up on small trees that are prone to being moved by
strong winds.
5. Remove any limbs which are right in front of the camera lens.
Warranty information
The warranty period is 24 months, unless otherwise specified, from the date the
product was purchased. The warranty validity must be supported by an invoice or
cash receipt on which date of purchase must be shown.
If errors are discovered during the warranty period, contact your dealer for
assistance.
This warranty does not cover normal wear or failure due to accident, abnormal
usage, neglected maintenance, improper maintenance, improper voltage or
modification.
Warranty is void if failure is caused by use of accessories other than original, or
intervention/repair is carried out by non-authorized service center.
If cash receipt or error description is missing, the product is not under warranty.