A19
I
Secure the motor by tightening the 2 screws.
A20
Turn on the power source.
7
Connect wiring harness. DO NOT ALLOW THE MOTOR TO
HANG FROM THE WIRING HARNESS.
00000000
A17
Reinstall the motor by inserting the tabs and pushing up
into position. Make sure the wires are not pinched
between the motor and the housing.
00000000
H
A18
ON
OFF
A21
Test the motor. If the motor does not run, check the plug
connection.
A22
C1
Go to step
on page 10
to attach grille.
41947-01 3/29/2006
41947-01 3/29/2006
05-HF-016-EngS_3.29.06.indd 7
3/29/06 6:40:56 PM
