Hunter MH37 Скачать руководство пользователя страница 68

Страница: 68 / 271

Boating Safety

4.2

used engine speeds (RPMs). See the Fuel chapter in

this manual for further details.
Make sure you have enough fuel on board for antici-

pated cruising requirements. In general, use 1/3 of

your supply to reach your destination and 1/3 to return.

Keep 1/3 in reserve for changes in your plans due to

weather or other circumstances.

NOTE: The supply line for the optional generator is located

higher on the fuel tank than the engine’s supply lines. This

is for your safety by preventing the generator from depleting

your fuel supply should it ever be left running.

Be sure life-saving and fire extinguishing equipment is

on board. This equipment must meet regulatory agency

standards, and it should be noticeable, accessible, and

in a safe operating condition. Your passengers should

know where this equipment is and how to use it.
Keep an eye on the weather. Be aware of possible

changing conditions by checking a local weather report

before your departure. Monitor strong winds and elec-

trical storms closely.
Always keep accurate, updated charts of the area on

board your boat.
Before you leave the port or harbor, file a float plan with

a family member, relative, friend, or other responsible

person ashore.
Always operate your boat with care, courtesy, and

common sense.
Instruct at least one other passenger aboard in the

operating procedures in handling your boat. This per-

son can take over if you unexpectedly become unable

to do so.
Do not allow passengers to ride on parts of your boat

other than designated seating areas.
Ask all passengers to remain seated while the boat is

in motion.
Do not use the swim platform or boarding ladder while

engines are running.
Understand and obey the “Rules of the Road.”
Always maintain complete control of your boat.
Do not overload or improperly load your boat.

4.2.2 Safe Boating Courses

Within the U.S., safe boating information and courses are

available from a variety of sources. The Coast Guard

Auxiliary website for boat safety, www.cgaux.org, con-

tains a wide selection of opportunities for education on

•

•
•
•

boat safety. Similarly, the U.S. Power Squadrons web-

site, www.usps.org, and the Boat Owners Association of

the U.S. website, www.boatus.com/foundation, also offers

opportunities for education in safety and operation.

Outside the U.S., contact your governmental branch

responsible for overseeing your country's recreational

boating for educational options on safe boating.

4.2.3 Voluntary Inspections

State boating officials in many states or the U.S. Coast

Guard Auxiliary offer courtesy inspections to check out

your craft. They check your boat for compliance with

safety standards and required safety equipment. You

may voluntarily consent to one of these inspections and

are allowed time to make correction without prosecution.

Check with the appropriate state agency or the Coast

Guard Auxiliary for details.

4.2.4 Rules of the Road

Navigating a boat is much the same as driving an automo-

bile. Operating either one responsibly means complying

with a set of rules intended to prevent accidents. Just as

you assume other car drivers know what they are doing,

other boaters assume you know what you are doing.

As a responsible sailor, you will comply with the “Rules

of the Road”, the marine traffic laws enforced by the U.S.

Coast Guard. There are two sets of rules: The United

States Inland Navigational Rules and the International

Rules. The United States Inland Rules apply to all ves-

sels inside the demarcation line separating inland and

international waters. The Coast Guard publishes the

“Rules of the Road” in its publication “Navigational Rules,

International-Inland.” You can get a copy from www.

uscgboating.org, www.navcen.uscg.gov or from your

local U.S. Coast Guard Unit or the United States Coast

Guard Headquarters, 1300 E Street NW, Washington,

D.C. 20226.

4.2.5 Safety Equipment

IMPORTANT: Federal law requires you, the owner, to provide

and maintain safety equipment on your boat. Consult your Coast

Guard, state, and local regulations, to ensure your boat has all

required safety equipment on board. Additional equipment may

be recommended for your safety and that of your passengers.

Make yourself aware of its availability and use.

If your boat is configured to American specs, we have

installed or provided the following safety equipment in

Содержание MH37
















































































































































































































































































Результаты поиска

Содержание MH37

Отзывы:

Hunter MH37, Руководство оператора, Страница: 68 / 271

Результаты поиска

Содержание MH37

Отзывы: