Hunter MH37 Скачать руководство пользователя страница 263

Страница: 263 / 271

Glossary

15.3

Center

of effort

(COE):

The pont at whch all the forces actng on

the sals are concentrated.

Center

of lat-

eral resis-

tance

(CLR):

The underwater center of pressure about

whch a boat pvots when changng

course.

Center-

board:

A board lowered through a slot n the keel

to reduce leeway.

Chain

pawl:

A short lug whch drops nto a toothed

rack to prevent the anchor chan runnng

back.

Chain

plate:

A metal plate bolted to the boat to whch

the shrouds or backstays are attached.

Channel:

A navgable route on a waterway, usually

marked by buoys. Channels are smlar

to roads where the water s known to be

deep enough for shps or boats to sal

wthout runnng aground.

Chart

datum:

Reference level on a chart below whch

the tde s unlkely to fall. Soundngs are

gven below chart datum. The datum level

vares accordng to country and area.

Chart

table:

A table desgnated as the area n the boat

where the navgator wll study charts and

plot courses.

Chine:

The locaton where the deck jons the hull

of the boat.

Chop:

Small, steep dsorderly waves.

Cleat:

A wooden, metal or plastc fttng around

whch rope s secured.

Clevis

pin:

A lockng pn through whch a splt rng s

passed to prevent accdental wthdraw.

Clew:

The after, lower center of a sal where the

foot and leech meet.

Close

reach:

The pont of salng between close-hauled

and a beam reach, when the wnd blows

forward of the beam.

Close-

hauled:

The pont of salng closest to the wnd;

Содержание MH37
















































































































































































































































































Результаты поиска

Содержание MH37

Отзывы:

Hunter MH37, Руководство оператора, Страница: 263 / 271

Результаты поиска

Содержание MH37

Отзывы: