Assembly Instructions
Fire Bricks
The Fire Bricks, in this appliance, are factory fitted. The following set of diagrams show the removal
sequence that you will need to employ when servicing your Hunter stove.
Side Bricks
Rear Brick
Recouping Baffle
To assemble these Fire Bricks, simply reverse the above procedure.
Remove all central single-
width Grate Bars, and outer
Triple-width grate bars below
the brick. Take hold of the
front of the Side Brick and
remove it from the Stove.
Pull the top edge of the
Rear Brick towards you,
lift and remove.
Lift the Baffle and
slide to the right.
When the left side of
the Baffle clears the
Baffle Support,
lower it into the Fire
Box and remove.