manualshive.com logo in svg

Hunter H31, Руководство оператора

Поделиться
Скачать
Hunter H31 Скачать руководство пользователя страница 43

WARRANTY REGISTRATION

These limited warranties shall not be effective unless the HUNTER Warranty Registration Form
and Pre-Delivery Service Record, which are furnished with each new boat, are filled out com-
pletely and re-turned to HUNTER within ten (10) days of delivery.

Return of the Warranty Registration Form to HUNTER, signed by both Dealer and Owner, is crit-
ical. Warranty coverage cannot be initiated until the completed form is received at HUNTER.

All repairs and/or replacements will be made by an authorized Hunter dealer, or at the option of 
Hunter, at the Hunter plant. If the repairs are of such a nature that the warranty work must be
performed at the HUNTER plant, transportation costs to and from the HUNTER plant shall be
paid by the owner. The labor cost reimbursement will be based on a Labor Allowance Schedule
established by HUNTER and where not applicable, on a reasonable number of hours as deter-
mined by HUNTER. Any repairs and replacements must be approved in advance by an autho-
rized HUNTER service representative.

TRANSFER OF LIMITED WARRANTIES

For 1995 and later hull numbers, the limited warranties will be transferred to a subsequent pur-
chaser of the boat if:

(1) A notice of the transfer of ownership of the boat is given by the subsequent purchaser in
writing to Hunter within thirty (30) days of the transfer.

(2) The notice shall include the name, address and telephone number of the subsequent pur-
chaser, the date of purchase, the hull number and the name of the seller of the boat.

Hunter will mail to the subsequent purchaser notice of the expiration dates of the limited war-
ranties (see form letter, attached).  The transfer of the ownership of the boat will not extend the
expiration dates of the limited warranties. 

CUSTOMER SATISFACTION SURVEYS

During the first  year of ownership, the first purchaser will receive two Customer  Satisfaction
Surveys - the first  (CSS#1) will be received shortly  after taking delivery and focuses on the
dealer’s ability to sell and commission the boat, and the Owner’s initial satisfaction. The second
survey (CSS#2), nine to ten months into ownership, “measures” dealer service capability and
allows the owner to evaluate most of the boat’s functional systems and characteristics. Both
surveys are dependent upon receipt of the first purchaser’s Warranty Registration Form.

   Hunter  • Warranty

3.7

Содержание H31



























































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды