Hunter H31 Скачать руководство пользователя страница 161

Страница: 161 / 186

Hunter 31 • Getting Underway

13.3

WARNING

Leaking fuel is a fire and explosion hazard. Personal

injury or death could occur.

DANGER

Explosive fuel vapors can become trapped in the

lower portions of the boat. Close all hatch covers,

windows, doors, and compartments while fueling

your boat.

1. Evacuate all occupied enclosures immediately.

2. Shut down engine.

3. Turn off all electrical circuits.

4. Inform the dockmaster. Have a qualified technician

check the boat immediately to determine the source of

the odor.

5. Open the boat for natural ventilation.

6. When you can no longer smell fumes, locate the

source. Dispose of fuel in a safe, approved manner.

13.2 Starting the Engine

First, turn power at the battery switch to the On position,

energizing the battery and switch panel (detailed in the

DC Electric Chapter). Make sure that the bilge blower

hoses are properly attached and that blower openings

are not blocked.

It is important to follow the procedures to prevent electric

shock.

Check that bilge pumps are working by switching breaker

to MANUAL (OFF) position. Switch ON breaker for fresh

water pump to make sure it is working.

Check out the following equipment and accessories:

Seawater intakes that feed propulsion equipment

Navigation Lights

Throttle and shifter for smooth operation

Steering system ease of operation

•

WARNING

Using a damaged or improper cord for shore power

can cause electrical shock and serious injury. Use a

cord specifically designed for shore power connec-

tion. Do not use a household extension cord.

CAUTION

Water is an excellent conductor of electricity. Keep
shore power cord out of water. Do not operate any

AC device while you, or the cord, are in the water.

To prevent injury or equipment damage, keep all AC

electric system components dry.

WARNING

DO NOT disconnect the shore power cord to the boat
first. You could accidentally drop the cord into the
water, which may result in electrical shock and seri-
ous personal injury.

Check engine, and gear box oil level. Refer to the engine

manual for instructions. Add oil if needed.

Check the coolant level.

13.2.1 Running the Engine

Now it is time to start the engine. This is accomplished

by the following procedures:

1. First, move the throttle to the idle position and ensure

that the shift levers are in neutral.

2. Next, turn the switch to the “On” position. You will

then hear an audible alarm. This is the oil alarm and will

cease when the engine have started and the oil pressure

rises. You can also check the voltage gauge to see if

you actually have enough power in the batteries to start

the engines.

3. After checking the DC gauges, then start the engine

with the start switch.

4. Once the engine starts and the oil pressure builds, the

alarm will cease. If the alarm does not cease, shut down

the engine and check your oil levels. If normal, seek the

help of a professional mechanic.

Содержание H31



























































































































































































Результаты поиска

Содержание H31

Отзывы:

Hunter H31, Руководство оператора, Страница: 161 / 186

Результаты поиска

Содержание H31

Отзывы: