manualshive.com logo in svg

Hunter H31, Руководство оператора

Поделиться
Скачать
Hunter H31 Скачать руководство пользователя страница 108

Hunter 31 • AC Electric Systems

8.4

DO NOT allow the dockside power cord to come in

contact with the water. Never operate any power 

tool or other electrical equipment while you or the 

devices are in contact with the water, as this may 

cause electrocution resulting in shock or death.

8.1.3  Isolation Transformer

Beyond the shore power connection and the shore
power breaker, your AC power will be routed through the 
Isolation Transformer. See the Mechanical Arrangement 
Illustration for the location of the ISO Transformer.

The ISO Transformer is a standard “dry” type 3.6 KVA 
transformer that basically isolates your boat from the 
shore power. It is a valuable safety  feature aboard your 
boat.

8.1.4   AC Distribution Panel

The distribution panels for both AC and DC power are 
located behind the nav station seat.

8.1.5  Battery Charger

The boat’s batteries are normally charged whenever the
engines are running. If  you are docked for an extended 
period of time, operating DC devices and equipment will
drain the power from the batteries. Unless the batteries
are kept charged, they may not have enough power to
start the engine when you need them.

The battery charger  (Fig. 8.6) will automatically charge 
the engine batteries when the power supply is through
the AC system. The battery charger breaker is at the AC 
Distribution Panel.

Leaving the battery charger on whenever AC power is
available is a good idea. It will keep the batteries fully
charged. After the batteries are recharged, it provides 
a maintenance or trickle charge as needed. The battery 
charger is under the chart table. Refer to the manufac-
ture’s owner’s manual for operating procedures.

8.1.5.1 Basic Battery Charger Operation Procedure

1. Connect shore power cable to power AC Panel and 
turn on the AC Main breaker.
2. Turn “Battery Charger” breaker to the “ON” position.
Note: 

It  is not necessary

to  turn  on the “House/Start” 

battery switch to provide charging power to the batter-
ies.

 

 

         Figure 8.5

The circuit breakers for the battery chargers are located 
on the AC Distribution Panel.

8.1.6 Engine Alternator Operation

1. Check sea strainer and open engine raw water sea-
cock.
2. Turn battery selector switch to the #1 position.
3. Start engine.  (Follow starting instructions in the 
“Engine Manual”)
4. Turn battery selector switch to both to charge all bat-
teries

8.1.7 Water Heater

Be certain the water heater is full of water and does 

not contain air.  If the water heater is not full of wa-

ter, damage to the heating elements may result when 

electrical power is turned on to the unit.

The  water heater  use  and  function is  described in the
Water Systems Section.

The water heater is powered by the AC Distribution 
Panel. It is much the same as an electric water heater in
your home except in this case, the heater uses 120 volt 
(220 overseas), but it uses elements to heat the water 
to a specified temperature.  Consult the manufacturer’s 
documentation  for any internal information about the 
water heater.

8.1.8 Microwave

The microwave is powered with the 120 volt (220 over-
seas) power through the breaker marked “Microwave.” 

 

There is a 120 volt (220 overseas) receptacle behind the
microwave that it is plugged into.  This outlet is not part
of the GFI circuit.  It is protected by the breaker on the 

Содержание H31



























































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды