
GPS Alert
GPS Alert is a function that notifies the owner of changes in camera's
geographical location.
Within 1km of the camera's geographical location on the map is a safe
zone. Beyond this zone, GPS Alert automatically sends an alert to the
APP informing the owner “Alert! Your camera is out of safe zone”.
Important!
Do not activate the GPS Alert function until the camera is in correct
location. Once the camera's geographical location is updated on the
cloud server it will be stored as reference location.
To activate the GPS Alert function:
1. In the camera menu, set the “GPS” to “ON”.
SETUP
à
MENU
à
Cam
à
GPS
à
ON
2. In the camera APP settings, set the “GPS Alert” to “ON”.
APP
à
Setting
à
General Settings
à
GPS Alert
à
ON
To stop receiving GPS Alert, switch the function OFF in the APP.
APP
à
Setting
à
General Settings
à
GPS Alert
à
OFF
Note!
●
If Remote Control is in ON-Instant mode: commands from the APP will
take effect immediately, the camera will search for GPS every two hours.
●
If Remote Control is in ON-0.5H – ON-24H mode: commands from the
APP will be executed based on the time interval setting, the camera will
search for GPS according to the time interval setting.
To change the camera GPS reference location:
1. Turn OFF the GPS Alert in the APP, wait for the command to be
executed.
2. Slide the “Power Switch” to SETUP position, wait for the GPS
searching process to end.
3. Slide the “Power Switch” to ON position.
4. Turn ON the GPS Alert in the APP, wait for the command to be
executed.
5. New reference location is stored on the cloud server.