
SETUP
à
MENU
à
Cam
à
4G Setup
à
Manual
à
APN, Username,
Password
Note!
It is not a must to enter Username and Password of APN, but
some operators require this password access to get connection on
their 4G network. Check with your SIM card operator to get this
confirmed.
6. Function Test
Follow the steps in the quick guide to setup an account and top-up your
SIM card, otherwise the photos will only be stored on the SD card.
To test the camera operation:
1. Slide the Power Switch to SETUP and wait for the camera to
connect to the operator (4G signal strength indicator is shown on
the screen).
2. Press the OK button once. The camera will take a photo, save on
the SD card, and transmit the photo to your APP.
3. Follow the sequence of events on the screen. Transmitting the
photo may take 35 to 45 second based on the operator's network
and signal strength.
Note!
●
If camera configuration is correct the screen will show message “send
successful”.
●
If failed to transmit follow the steps in quick guide.
●
Two bars of signal strength are required for the camera to operate well.
●
Do not forget to top-up your SIM card with data.
7. Start Using
Slide the Power Switch to ON; camera is ready to work upon motion
triggers (the screen will not light up upon “ON”). You can mount it out to
work directly after this if default settings are preferred.