Attention!
1. Insert the SD card correctly, camera does not support SD card hot
swap (insertion).
2. Use high-quality AA batteries to prevent battery cell corrosion of
leaked acid.
3. Do not invert the battery polarity in the compartment when putting
in the batteries.
4. Use only original adapter (12V/2A) that is adapted for this camera.
Hunter Power Adapter (Article NB: TL20130).
5. In Test mode, camera will automatically power off in 3 mins if
there is no keypad touching.
6. Do not interrupt power supply during firmware upgrade, contact
your local dealer for assistance if the device does not work after
upgrading.
7. Do not frequently insert or pull out SD card and battery or plug in
and out the adapter when the camera is ON.
8. Do not have any floating objects, such as leaves, strings, or
ribbons in the 3M motion detection zone of camera, to avoid
accidentally taking photos/videos.
9. Do not keep the camera next to hot irrelevant objects, air
conditioner exhaust vents, and light, etc..., to avoid accidentally
taking photos/videos.
10. The camera is equipped with 100° FOV lens and 57pcs IR LEDs.
To ensure IR LEDs can give enough flash in dark environments,
use high quality AA batteries that delivers enough amperage to
power the illuminator.
11. Camera functions best when 1,2 to1,9 meter off ground. Any
lower the motion sensor does not function well.