manualshive.com logo in svg

Hunter ACC2, Быстрый старт

Поделиться
Скачать
Hunter ACC2 Скачать руководство пользователя страница 50

50

 

 hunter.direct/ACC2help

Conditional Response

SOS (STATUS OUTPUT STATION)

An SOS is a dedicated station output that is only used with 
Conditional Response. The purpose of the SOS is to trigger 
an external light or other device when the controller is in an 
alarmed state, so that field personnel can be notified of an 
alarm without having to open the controller door. 

An SOS requires a dedicated station number to operate 
(any station number may be used). The station will turn on 
whenever the Conditional Response condition is in effect.

The station output may be used to directly power a 24VAC 
signal lamp installed in a conduit hole, or used to activate a 
relay for other purposes.

SET UP AN SOS STATION

In the Conditional Response screen, use the “Then” soft key to 
select a “Start SOS Output” Type.

At Selection, select the unused station you want to designate 
as the SOS station.

• 

This station must not be included in any irrigation 
programs.

• 

Only one SOS station should be used per controller. 

• 

All other SOS responses should be selected to the same 
SOS station number.

• 

The SOS station output will be wired directly to the 
external light or other 24V powered device.

• 

In Decoder Controllers, the SOS must be operated by a 
decoder station. We recommend programming and placing 
a single station ICD-100 in the controller cabinet for  
this purpose.

START STATIONS, PROGRAMS, AND BLOCKS

When using Conditional Response to start a Station, Program, 
or Block, other options appear below the selection.

MODE

If the Mode is set to 

Manual

, the Station, Program, or Block 

will run alone, and all other automatic irrigation is stopped 
until the response is finished.

If the Mode is set to 

Auto

, the response will occur without 

halting other scheduled irrigation. If the system is using 
Flow Manager, the response may not begin immediately. 
The responding stations will be fit into the Flow Target, as 
available, by the Flow Manager.

If 

Stop if Condition Clears

 is checked, the Station, Block, or 

Program will only run while the trigger condition is present. 
If the condition continues, a Station or Block will run for 
the specified run time, and a program will run once for the 
duration of the program. 

If the box is not checked, the response will continue for the 
total Run Time or duration of the program.

Содержание ACC2





























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды